Optimize your storage and inventory management
Optimize your storage and inventory management




  1. Model Variant


Product code




Barcode Module



1D/2D imager


RFID (Read/Write)*

LF (125-134 KHz)

HF (13.56 MHz…)


Interface for wireless communication

Bluetooth 4.0 BLE with 2 profiles: SPP or HID

Interface for wired communication

Lightning connector for iOS devices

USB for Android and Windows devices


Internal rechargeable 1330mAh Lithium-Ion (3.7V)

Ruggedized level

“Gun Type” (Drop resistant: 1.5m/5” x time on concrete)







Sled Type

Depend of Smart device (iPod Touch, Samsung Player, iPhone 6, Samsung S5…)

* Option

** Specific module on demand (mid-range or long-range scanning purposes, )



  • Dock Chargers
    • Single dock
    • Multiple dock
    • Wireless dock (for RFID modules only) – Coming soon –
    • Battery pack extension for RFID module – Coming soon –
  • Application development
  • Accessories
    • L-scan pouch
    • L-scan holster
    • Necklace, Hand lace
    • Protective screen (optional)




  1. General Specifications





ARM-based 32-bits MCU


- Bluetooth 4.0 BLE

- USB OTG / Lighting connector (iDevice only)

Firmware upgrade (via USB cable or “over the Air”)

Function buttons

On/Off Button

Scan Button

Eject Sled button

Barcode Reader

1D CCD module

Maximum reading distance: 40 cm (15.7”)

Optimized for reduced lightning conditions

2D CMOS imager optimized for the L-SCAN
(Scan rate 125 scans per second)

Reading distance: 2 to 20 cm (.78” – 7.8”)

Scan barcodes on LCD display, smartphone


Symbologies supported (not limited):

1D Barcodes: JAN/UPC/EAN incl. add on, Codabar, Code 11, Code 39, Tri-Optic, Code 93, Code 128, GS1-128 (EAN-128), IATA, Industrial 2of5, Interleaved 2of5, ISBN-ISSN-ISMN, Matrix 2of5, MSI/ Plessey, Telepen, UK/Plessey, S-Code

• Postal code: Chinese Post, Korean Postal Authority code

2D barcodes : Composite codes, Data Matrix, Maxi Code (mode 2~5), PDF417, QR code, US Driver’s License (AAMVA)


LED indicators for Power on, full charge, Low battery, Battery Charging, Bluetooth communication, wired status and barcode reading status.


Rechargeable Li ion battery – 3.7V / 1,330 mAh

Charging time : 2h30 (approx.)

Barcode reader and smart device are charging at the same time.

Battery Life

10,000+ 2D scans on full charge (tested in wired mode)

Energy saving mode enabled



Environmental features

   Operating Temperature: : 0 ~ 60

   Operating Humidity: 10% ~ 90% (non-condensing)

   Storage Temperature: -20 ~ 60

   Storage Humidity: 5% ~ 95% (non-condensing)


6 months


~ 170 grams without smartphone

~ 200 grams with the LF or HF RFID module, without smartphone

Rfid Reader (optional):

ISO 14443 TYPE A / TYPE B and ISO 15693

Support Felica system – Desfire / Ultralight C

options :

LF 120-150 KHz

HF 13.56 MHz (standard)

UHF (on demand – country dependent)

The RFID module enabled wireless charging mode of the L-SCAN

Package content

Pistol type reader, Sled, Charging cable, Wall charger


  1. SDK functionalities


The SDK provides the following functionalities (more function are available on request):


  • Manual Activation Mode

In Manual Activation Mode, you must press the external trigger to scan a bar code. The engine scans until a bar code is read, or until the external trigger is released.

  • Continuous Scan Mode

This programs the engine to continuously scan and decode, with the laser and motor staying on.

  • Blinky Mode

Blinky Mode can be activated by the External Trigger. When Blinky On/manual mode are selected, the scan engine blinks on and off and the bar code is scanned when the trigger is pushed.

  • Application Trigger Commands

You can activate the engine with the application trigger commands.

  • Autodetect mode
    The laser is off and switch  
  • Beeper

    The beeper may be programmed On or Off in response to a good read. Turning this option off, only turns off the beeper response to a good read indication. All error and menu beeps are still audible.


  1. Support


Two different supports are available:

  • L-Scan SDK support:

Include phone support for SDK implementation, SDK maintenance, L-Scan firmware update. 

  • L-Scan Support:

Include phone support for implementation and L-Scan firmware update. 


Two level of support are available:

  • Standard:

Monday to Friday, from 9.00am to 18.00pm (New York Time), excepting bank holidays

  • Premium

Monday to Sunday, from 9.00am to 18.00pm (New York Time), excepting bank holidays



  1.   Hardware Warranty


Standard Warranty (Included)

This warranty (6 Months) covers any malfunction to the device components and its functionality and not any external damage that may occur after client usage (e.g., dropping the device, blunt force, improper use outside of specific user guide parameters, water or weathered damage, etc.).

If a under the warranty Product becomes defective, Client shall return it to I Love Mobile within the warranty period of 6 months, I Love Velvet will replace it at no charge to the Client within eight (8) business days. 


Extended Warranty (Fees)

Hardware Replacement (1 year minimum): This warranty covers any malfunction to the device components and its functionality and cover improper use outside of specific user guide parameters, any external damage to the screen, or accidental damage but does not cover water or weathered damage.

If a Product becomes defective, Client shall return it to I Love Velvet within the extended warranty period, I Love Mobile will replace it at no charge to the Client within three (3) business days.

Print Print | Sitemap
Copyright © 2016 - I Love Mobile Inc. - L-SCAN, Easy-Scan. Apple iPod touch®, iPad®, iPad mini® and iPhone® are registered trademarks of Apple Inc. Samsung, S5 and Galaxy S are registered trademarks of Samsung Electronics Co., Ltd.